Cranksets

*Designed specifically for frames using 47.5mm chainline. The RX Crankset is our latest step into the Gravel and Road world, following our successful RX4 calipers and RS4 hubs. A two-piece hollow design allows for the removal of any unwanted material increasing stiffness and reducing weight. And all proudly designed, manufactured and tested in Barnoldswick, UK to the same standards as our MTB cranks, for confident use on or off road. KEY FEATURES - Two-piece hollow construction - Fully CNC machined for precise material removal - 30mm aluminium axle - Compatible with almost every BB system with our extended range of BB’s - 170, 172.5 and 175mm arm length available - Arms available in black, silver, bronze, blue, red, purple and orange - Self-extracting axle/arm interface - Weight 518g (172.5mm and 5 bolt spider, w/o BB) - Compatible with direct mount chainrings or five-arm 110BCD spider

One-piece crankset from Salt BMX. - Crank Length: 170mm - Drive Side Compatibility: Right Hand Drive - Crankset Style: 1-Piece - BB Style: Not Included - BB Included: No

RaceFace Crank Arm Fixing Bolts - M15

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.

Replacement spindle spacers for Race Face X-Type XC/AM cranksets.

Bolts for attaching sprocket to the crank arm.

Replacement spindle spacers for Race Face X-Type FR/DH cranksets.

M8 Capless Crank Arm Bolt Kit - For square-taper & Powerspline

Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair

Race Face crank bolt/puller for 2008 and newer Next SL cranks and 2012 and newer Atlas cranks.

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.

- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool

Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

RaceFace CINCH Crank Bolt and Puller Cap Sets.

CINCH Crank Bolt with Washer

Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks

Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Self-extracting

Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!

This Wheels Manufacturing Hollowtech II Crankarm Fixing Bolt For Late Model Shimano Road Cranks and LX keeps your Shimano crankset with 24mm spindle nice and snug. It is required to achieve perfect bottom bracket bearing preload.

Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.

RaceFace CINCH Crank Bolt and Puller Cap Sets.

Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts

TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included

• Square taper interface • Only includes left crank

- Forged steel - 24 TPI

Race Face Crank Arm Fixing Bolts - M18 Crank Bolt - Fits 15SX/Atlas/SixC CINCH - Not self-extracting