- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Bar adapter that allows you to run RoundBar on StreamLine Towers.
Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
$43.00 - $50.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Yakima's Universal Mighty Mounts are a simple way to install Yakima accessories on your car's factory racks. The universal design fits almost all factory crossbars.
Thule's Ride-On Adapter lets you turn your factory-installed roof rack into a great bicycle rack. It attaches quickly to the factory rails and accepts up to 2 Thule roof-mount bike carriers (sold separately).
Thule's Wheel On solves the problem of where to put your front wheel when your bike is on your roof rack. Plus, it helps keep the inside of your car clean, too.
Thule's XK3 Xsporter Rack Adapter makes your Toyota Tacoma compatible with Thule's revolutionary Xsporter truck bed rack system (sold separately).
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Yakima's LoadStop brackets prevent your loads from shifting side to side, without having to stuff a whole bunch of folded-up blankets onto your roof. FEATURES: - Carries ladders and lumber with sturdy L-shaped brackets - Safely holds loads by preventing lateral shifts with grippy ribbed surface - Holds thicker, taller loads with a higher vertical edge - Compatible with Yakima crossbars only - Works well when paired with Heavy Duty Straps (sold separately) - Set of 4 brackets
A premium, universal wheel fork for the new bike axle standards. The universal SpinVice clamp works on most crossbar shapes and is compatible with an SKS lock. - Folds down when not in use - Universal bar attachment with SpinVice clamps - Double wheel retention with axle and ZipStrips - Lockable to crossbars (accepts one SKS lock) - Works with all new wheel and axle sizes TECHNICAL SPECS - Weight: 2.30 lbs - Dimensions: L 19.00” x W 5.00” x H 9.00”
Let your friends enjoy the trip, because loading and unloading with the BoatLoader could not be easier. The telescoping load-assist arm lets you load your boat while protecting your vehicle and your boat, and retracts into your Yakima crossbar when not in use. - Telescoping boat load-assist arm retracts into your Yakima crossbar - Protects kayaks, canoes and your car from dings, scratches and dents - Corrosion-resistant - Fits Yakima round crossbars only - Extends 28 inchesfrom end of bar
Fully lockable multipurpose holder for carrying paddles, oars, and masts. - Fully lockable holder for paddles, masts, oars, and other similar sized items. - Fits items up to 4 inch/10 cm diameter - Capacity to transport and lock multiple paddles - One Key System - can be locked, lock (1) sold separately - Equipment protection provided by rubber cushion - Fits Thule square, xsporter, rapid aero, and professional series bars, round bars, and most factory installed cross bars - Integrated cable secures items and deters theft of expensive paddles
-Extends the Mini Skinny by 14" -Integrated 9mm Fork Mount -Retains 50% of usable crossbar space -Locking roof bar mounts -Basket comes fully assembled
Simple, effective and super sturdy, Thule's Quest rooftop bag mounts on your rack to provide 13 cubic feet of carrying capacity and keep your car clutter free. Its heavy-duty construction, oversized rain flap and sealed seams ensure your goodies are protected from the elements. The Quest features interior cargo management, foam inserts and molded handles for easy packing and handling. Plus, it comes with its own stuff sack for easy storage when not in use.
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Thule says their Fairing is a stylish roof-rack accessory that decreases noise and wind resistance. But we both know what you'll use it for: plastering it with all your stickers. That's okay, we do the same thing. This polycarbonate shield fits both square and Rapid Aero crossbars (sold separately), comes in several widths to fit a wide range of vehicles and is built for rigidity to alleviate wind-slap.
Whether you're headed out for the weekend or a coast-to-coast odyssey, Thule's Outbound is the perfect travel companion. This soft-sided, weather-resistant rooftop accessory is spacious enough to carry your entire family's vacation gear, and tough enough to protect it out there on the open road. The laminate material is rugged and highly weather resistant, and the padded base protects your car's finish. Heavy-duty, double-stitched straps attach the cargo bag to your roof-rack crossbars or raised factory rails. Twin compression straps keep the load stable, minimize abrasion and noise, and improve aerodynamics. When you've gotten back home, the Interstate folds down for compact storage.
One person can load and unload a boat with this unique retractable arm that fits inside your Thule load bars. - Supports up to 50% of the kayaks weight and prevents vehicle contact - Integrated load stop prevents boat from sliding off bar - Holds nearly every kayak shape and size - Fits Thule square bar rack system only
- Sold in pairs-combine them with rollers or saddles for a custom set-up - Flexible saddle shape conforms to boat hull for secure full contact cradling - Felt padded cradles protect hulls and are shaped for easy loading - Tool free install to any cross bar - Locks to base with SKS lock Cores for added security (sold separately) - Premium HeavyDuty strap and bow/stern tie down included - Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)
Thule makes carrying all your stuff easier than ever with their Caravan Rooftop Bag. It provides 13 cubic feet of carrying capacity to securely hold your gear and easily attaches to most aftermarket and factory roof racks. The Caravan keeps your goodies safe and dry with its weatherproof construction and it features storm flaps with Velcro fasteners to protect the zippers. Plus, it conveniently collapses into its own storage bag.
Thule's Load Bars are a rock solid rack solution that come in 4 different widths to fit a huge range of vehicles.
Be the envy of all the boaters at the river with the EvenKeel's ingenious and thrifty saddle-style rooftop rack. Universal mounts fit nearly any crossbar right out of the box. And out of the box it comes with everything you need to haul your boat, including straps and bow/stern tie-downs. Sold in a set of 4.
- Securely carries both road and mountain bikes QR and thru-axles - Includes interchangeable inserts for QR axles (9mm) and thru axles (12mm, 15x100, 15x110) - Fat Bike compatible with optional accessory (Sold separately) - No frame contact means no damage to carbon fiber and custom paint jobs - Optional SKS locking package secures mount to vehicle, bike to mount (sold separately) - 1 bike, 40lbs capacity
The KeelOver attaches directly to any roof rack for a quick, tool-free assembly, right out of the box. Not only will your canoe arrive to the water safely, but youll get to spend more time on the water, making for many happy paddlers. - Universal design attaches to round, square, aerodynamic and factory bars with a single tightening knob - Includes canoe securing straps and bow / stern tie-downs ensuring you have everything needed for a single canoe - Durable over-molded rubber cushions the canoe gunwale while providing stability - Simple, tool-fee installation and assembly within minutes of opening the box - Dual bolts included to ensure an integrated fit to vehicle - Rubber padding protects your crossbars from damage or corrosion
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
$119.95 - $139.95
The sleekest bike rack ever to rip down I-70. RockyMounts JetLine is a highly crafted fork mount with a low profile and streamlined aluminum head and tray, designed to fit Slotted Crossbars (RockyMounts Ouray, Thule AeroBlade, Yakima Whispbar and JetStream, Rhino Rack Vortex, factory bars from Audi, BMW, Mercedes, Mini, Volvo, VW), Thule Square Crossbars, and Yakima Round Crossbars. The JetLine will hold bikes with a quick-release front wheel and holds skinny road tires up to 2.7-inch mountain bike tires. The simple, long-throw quick-release function allows easy bike loading and unloading. JetLine is compatible with disc and standard brake systems. Lock rack to car and bike to rack with RockyMounts lock cores and keys (sold separately—requires a 2-pack).
With an iron grip, Thule's Rapid Crossroad turns factory-installed raised rails into a versatile multipurpose rack system. Your car's rails are fully protected thanks to the integrated rubber lining. You also get maximum rack strength and a custom fit from the tooless, rubber-coated steel straps.
Fitting kit required for perfect fit of the roof rack to a specific car.
Page 1 of 4 Next page